LZ250 single spray sand recycling machine

Introduction: The biggest problem of the most currently existing artificial sand production line is out flow rate of the fine sand which above 0.16mm are fatal, the proportion can reach more than 30% sometime. The flowing out decreases the quality of sand, it cause poor sand grading and rough modulus. Excessive sand emission also pollute the environment.

LZ Series Sand recycling machine manages to resolve this flaw which stated below. Features: 1. Reduce the fine sand losing 2. the recycling rate of fine sand can reach 90% 3. Fines 0.16-3mm brings good profits 4.

Stable vibration, long serving life and easy maintenance Working principle: Through rubber pipes sand and water mixture is extracted from cleaning tank into slurry pump. The fine sand is collected by the centrifugal force of the cyclone, then fed to the polyurathane screen from the apex spray.

The 0.1-3mm fine sand and water are efficiently separated through the vibration screen. The waste water will flow back to the return box, through weld chute or pipes flowing to a settling pond. Specification:

Model Pump Cyclone Dehydrating sieve Productivity Weight Power Material (mm) Material Power(kw) (m³/h) (t) LZ250 7.5-11 Cr26 260 PU 2x0.55 30-80 2.05 LZ300 11-15 Cr26 300 PU 2x0.75 40-100 2.2 LZ350 15-18.5 Cr26 350 PU 2x0.75 70-130 2.56 LZ550 18.5-22 Cr26 550 PU 2x1.1 100-220 3.25 LZ650 18.5-30 Cr26 650 PU 2x1.1 120-272 3.95 LZ750 37-55 Cr26 750 PU 2x1.5 180-350 4.9 Application: It is widely used in rock crushing and washing plant, crushed sand or natural sand washing plant, mineral tailings processing site, etc.