LED solar road stud is a Roadway Safety product. Key specs — Origin: Guangdong; Price Term: FOB.
Product Description
Place of Origin Guangdong, China (Mainland)
Brand Name EBOCON
Model Number EB-DD-LF001S
Dimension 125x120x23mm
Color Silver
Material Aluminum, Solar Panel
Anti-stress 16T
Voltage 4V
Current 600mA
Lighting surface One/ two sides
Optional light color yellow, red, white and so on
Characteristic power support last for more than 7 continuing cloudy and rainy days
Key features: Square design creates good appearance while relieving the impaction from traffic load so as to be durable Combined size complying with the size of round post and saponaceous appearance, it can be installed at the top of round post at the cross, and make the cross clearer at night Two reinforced veins are designed inside to strengthen compression resistance Solar panel, electronics and optics are fitted inside waterproof and unbreakable According to requirement the number of LED can be single light, double lights and three lights in one side, as well single light, double lights and three lights in both sides Two screw holes are designed on both sides so as to be fitted steadily with screws in road or round post Epoxy glue is filled in the shell.
Easy, simple and steady to install like a standard road stud with two screws or glue, both in road and in round post Suitable for edge line of road strong resistance. shockresistance: can resistent the impact from automotive tires. high and low temperature endurable: temperature range -40°c to +60°c. anti-corrosion: under go water, oil, chemical and other corrosive substances. beautiful: bright color, reasonable style and diamond-like crystal clear lighting, very enjoyable, lighting roads and beautify the city.
Under normal day light charge, can work for four days, up to 12 consecutive rainy days Installation Procedure: 1. Check if the solar stud charge and discharge in normal way; 2. Identify the place for installation and clean it; 3. Clean the bottom of the solar stud and glue it onto the installation place; 4. Steady it with two screws.
Ok, all is over, but the solar stud will be not workable until 6—8 hours later after installation
