LED Module

Ø  Stylish appearance design with cap type Ø  Take high efficiency SMD Chip as light source application Ø  LED Chip applied by famous brands, Cree, Samsung, Epistar etc Ø  High brightness,large emitting angle ,low thermal resistance Ø  Low light decay and high uniformity of the emitting color Ø  Fabricated with a CAP TYPE Optical Lens Ø  With pure copper wire for a low thermal resistance Ø  Each unit can be used to cut Ø  Safety, energy saving and Eco-friendly Ø  UL/CE and RoHs approved Product parameters LED chip brand Cree / Samsung / Epistar Chip size 5054 Operating voltage DC  12V / 24V Power dissipation 0.75W   Emitting angle 160°   Luminous intensity 45lm（typ.） Dimension 63*15*8.5  mm （L x W x H） LED quantity 3 pcs Emitting color White Waterproofing rate IP67   IP type Injection workmanship Material of main cabinet ABS  , fireproof and inflame retarding Material of Lens Optical  Lens, fireproof and inflame retarding Color of main Cabinet White Material of connecting cable UL20  AWG，  300V/80°C Color of connecting cable Positive:  red; negative: white Max.

In series Based on Power Voltage Supply Adhesive type 3M adhesive Sponge Operating temperature -30~85℃ Storage temperature -40~100℃ Warranty 5  years

Product applicationnotes Ø  Don`t stick the surface of the light by sharp tools. Ø  Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced. Ø  Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up. Ø  The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape. Ø  The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.