K11 Waterproof coating special for concrete

BEIJING JIANHAI ZHONGJIAN : 1/ Manufacturer Direct Wholesale Sales

2/ The bigest waterproof coating manufacturer in China 3/ Laboratories with Professional and powerful Research&Development team to support technical service 4/ Three big factories are distributed in China(Beijing-Changping,Beijing-Fangshan,Jiangsu-Xuzhou) 5/ ISO9001 Quality Management System,iSO14001 environment management system and OHSAS certificated 6/ Get involved many big projects in China like subway,tunnel,civil building,comercial building etc.

7/ Excellent exported experience,exported to Africa,America,Australia,Russia ,Europe,Malaysia,Dubai,Middle east etc K11 concrete waterproof coating

Brief instructions:

JHZJ-06 is based on proprietary technology of k-11 and uses the mechanism of cementitious capillary crystalline materials and concrete, and combines with the adhesion, water holding capacity and flexibility of polymer emulsion and concrete, cement mortar base course, which has very good waterproofness. Main features: *The coating can restrain bacterial growth and prevent humidity

*Can be constructed on rough base

*Nontoxic and harmless, can be used in drinking pool and fishpond

*Can directly stick with tile or make level

*Can be constructed on moist base

*Can cover tiny crack and resist slight shaking

Packaging: *20kg/plastic cask *10kg/plastic cask

Where to use:

*Facades of the overall water seepage, *Kitchen and toilet, *Underground construction, *Elevators, channels, *Reservoirs, *Edible and non-edible water pool, *Waterproof floor. How to use:

1.Base course: The base course must be solid, clean, flat, and humid, no greasy dirt or dust; when there is a flaw or crack, it must be repaired by using cement mortar; and external corners should be made into circular arcs by spatula.

2.Stir and mix: Pour the additive into container with a certain ratio then pour the powder into the additive and stir adequately till they become mucilage without granules; to prevent layering and sediment, stir intermittently during use.

3.Construction: Directly use brush or brush roll to brushing the base course evenly, and make sure that there are no missed areas; brush 1 layer for damp proof, and 2-3 layers for waterproof. Brush the second layer when the first layer is not sticky (1-2h), and the direction shall be vertical.

4.Coating protection: After finish the slurry constructing, the coating shall be protected including pedestrians prohibited; rain erosion, insolation or sharp objects etc, it does not need special protection after the coating has been dry.

5.Coating maintenance: After construction have been done for 24h, use wet cloth to cover or spray with water to maintain the coating for 2-3days; if there’s high humidity or airless, drying time of coating will be longer, conversely it will shorter. Use mechanical ventilation to speeding if necessary for the project schedule.

6.Construction temperature: Between 5-40°C.