Jet Ventilator

TKR-400-T High Frequency Ventilator Features A. HFJV (High Frequency Jet Ventilation) through the pressure, which can supply the higher inspiration pressure so that the patients can inspire sufficient oxygen with a wet finger. B. Opening airway.

The ventilation can be made with high frequency and little tidal volume and low airway pressure, which is good to increase the blood oxygen density. C. Ventilation mode through nasal vestibule without effect, which avoid tracheotomy and tube so as to decrease patient's pain and the effectiveness of oxygen feeding is very good.

The patient can talk, drink and eat, when ventilating. D. Continuous positive airway pressure with of adjustable oxygen density adding effective humidifier can show the feature of CPAP better. E. The numeric display window can display parameter value accurately so that its performance and precision will be improved largely. F.

The multi-functional humidifier adaptor can be connected with any type of humidifier by trachea intubation of national or international standard.

Specifications - Power Supply: AC220V + 22V 50HZ + 1HZ - Output Power: < 35VA - Frequency: 10 - 150 Breaths/Min - I/E Ratio: 1:1 - 1:4 and Inverse Ratio - Driving Pressure: 0 - 0.15MPa - Relative Humidity: < 80% - Temperature: 5 - 40 C - Process Ventilation: T = 10min Pro I : f (150) : f (35) = 7:3 Pro II : f (35) : f (150) = 7:3 - SIGH: 3, 6, 9 Breath/Min - Alarm: Alarm with light and sound for no power and gas, lasting 6 seconds if no oxygen - CPAP: Not less than 1.0KPa - PEEP: Not less than 0.5KPa - Oxygen Concentration Adjustable: 40% - 90% Displayable - Jetting Volume Range: 0 - 1400ml/time - Pressure Regulator Limit: 0.30MPa - Ventilation Mode: HFJV (High Frequency Jet Ventilation), CPAP (Continuous Positive Airway Pressure), Pro I and Pro II Ventilation; HFJV + SIGH Ventilation.

Thanks