JS polymer cement waterproof coating

BEIJING JIANHAI ZHONGJIAN : 1/ Manufacturer Direct Wholesale Sales

2/ The bigest waterproof coating manufacturer in China 3/ Laboratories with Professional and powerful Research&Development team to support technical service 4/ Three big factories are distributed in China(Beijing-Changping,Beijing-Fangshan,Jiangsu-Xuzhou) 5/ ISO9001 Quality Management System,iSO14001 environment management system and OHSAS certificated 6/ Get involved many big projects in China like subway,tunnel,civil building,comercial building etc.

7/ Excellent exported experience,exported to Africa,America,Australia,Russia ,Europe,Malaysia,Dubai,Middle east etc JS polymer cement waterproof coating

Brief instructions:

In recent years the building waterproof coating is a large category in the rapid development. It is composed of an organic polymer emulsion and cement and various organic pigments and compounded with a two-component waterproof coating.

It is a new building material with both organic materials with high flexibility and inorganic materials with good durability .High strength and tough waterproof layer formed after the film. Main features: 1.Take water as the dispersion medium,non- toxic,harmless to the environment.It’s a kind of environmental friendly product.

2.Paint films have compare the high elasticity and the tensile strength,water resistant,the weathering resistance is good. 3.Can be directly used in many kinds of basic plane,no matter in the moist base or dry. 4.Easy to operate. There is no limits for basic unit moisture. Construction time could be reduced.

5 Any color auxiliary can be added to this product to achieve the effect of waterproofing and decoration.nce is good.

Packaging: 1.Tow-in-one: *20kg/plastic cask *10kg/plastic cask 2.Single component *20kg/plastic cask *10kg/plastic cask 3.Double components: *20kg/cask+20kg/Sack How to use:

1.Clean the surface, surface requires a firm and flat, with strength, not hollowing loose, sand and other phenomena, the yin-yang angle should be put into a circular, with a water outlet phenomenon should do first leakage treatment.

2.Use the blender stir and slowly add the powder, stirring for 5 minutes, stirring until the feed does not contain aggregate, with good material should be used up within 2 hours, otherwise will influence the construction of elevated viscosity. (Powder material can be directly used to replace ordinary Portland cement)

Coating weight ratio method according to the product packaging dimension scale ingredients, water adding amount can be adjusted properly, to adjust the coating station consistency, to meet the different parts of the construction elevation and plane.

Embedded in the groove sealing material, in the corner, pipe root and other details shall many times (2-5 times of brushing), underground engineering to paving a layer of reinforcement material

Each layer of brushing time interval of 8 hours, the winter should be extended, each over the film in0.4-0.5mm as well, should not be over too thick, inside construction should not add water or less water as well, in order to avoid coating flows.

3.Apply construction, primary processing, primer, additional layer construction, surface coating and protection layer

4.Using a brush or roller brush paint brush evenly on the grass-roots , should be painted horizontal and vertical cross, interval of 4 hours or more. General primer two, surface coating two, additional layer using 45-60grams / square meters of non-woven fabrics, each square was 3kg, thickness of 1.5mm, if have special structural requirements may account for the increased surface besmear brushes number.