Inverter Spot Welder

The P6 Inverter Spot Welding System Was Designed For The Collision Repair Industry And Is Suitable For Body Shop Applications And Industrial Use. Microprocessor Controlled, three Phase, Medium Frequency Direct Current Inverter Technology, Electronic Resistance Welding Machine With Water Cooled Clamp, Gives Excellent Results For Repair Work On Materials Such As High Strength Steels, Galvanised Sheet.

Feature

Control Panel Use A Large 5x7Monitor To Display Images And Clip Art And Software Is Stored On An Upgradeable Cpu By Internet. Touch Key For Selecting Wdling Jobs.High Pressure Water Cooled C Clamp

Electrode Pressure Setting In The Display , Versatile MultiFunction Gun ,High Output Currents Up To 12 Ka ,Reproducible Welding Quality ,Senses The Voltage And Out Compensates For Voltage Drops. Two Sided Spot Welding

Single Sided Welding ,Spot Hammer Dent Pulling ,Washer Welding ,Nut And Bolt Welding

Carbon Shrinking ,Contact Shrinking ,Stitch Welding ,Nail Welding .Moulding Clip Rivet Welding.

Technique Parameter

Input voltage 380 to 415V 3Phase

Mains Frequency 50 to 60Hz

Max Absorbed Power(Kw) 21KVA

Rated Power X=50% Kw 9.5KVA

Power Factor 0.8 Cosphi

Inverter Frequency 2000Hz

Secondary No Load Voltage 4 to 21V

Max Spot-Welding Current 12000A

Max Weld.Thick. On 2 Sheets 3 plus 3 mm

Max Electrodes Power 450daN

Duty Cycle % 5%

Insulation Class H

Protection Degree IP21

Dimensions LXDXH 130*80*80 cm

Weight 220 kg