Insulating glass

Hollow insulating glass is composed of two pieces or multi-pieces glass, with the alumina frame filling high-effective molecule sieve absorbent inside, and have some width interval, edge is bond by high strength seal glue, according to requirement, can chosen from common clear float glass, super-white glass, tinted glass, coated glass, Low-E glass, laminated glass, tempered glass, bent-tempered glass, etc, as insulating glass based sheet

The air in hollow insulating glass can become dried air with lower heat-conductivity under the absorbent action from high-effective molecule seive filling with alumina frame, and composed of a heat insulation and soundproof barrier. If charge inert gas, will further improve the property of soundproof, heat-insulation.

If use glass glue, can more effectively reduce the air-cooled phenomenon in the four sides, compared with groove alumina type hollow glass, U value can reduce 0.6-0.8/M2.K, and with longer sealed service life

Feature Good soundproof effect: hollow insulating glass can reduce noise up to 27-40 decibel, such as, the 80 decibel noise outside just have 50 decibel after reach to house Anti-wind pressure strength improves: curtain wall mainly bear wind load, so anti-wind pressure become glass wall s main index, the hollow insulating glass s anti-wind pressure strength is about 15 times of single sheet glass Product advantage Anti-frost: due to the 3 kinds mode of anti-transfer heating, the two sides of glass can keep big temperature difference, the inner glass surface can keep higher temperature, so can not be frosted heat insulation: can block heat radiation, have opposite action for construction open part, and with outstanding energy-saving effect Soundproof and reduce noise: Low-E glass adopt hollow, vacuum and inert gas design, and with good edge sealing, so heat insulating is good Fashionable in appearance: the reflective light is light blue or blue grey, with good decoration effect Higher day lighting and environment protection: high visible light breakthrough ratio, can increase day lighting effect in the house, can save energy; lower refection ratio, can avoid glass mixed phenomenon Specification Thickness: 4-12m Alumina frame width: 6, 9, 12, 16 mm Min size: 300*300mm Max size: 2400*3500mm Standard Confirm to GB/T11944(hollow insulation glass)nation standard Low-E hollow glass working principle: Low-E film layer is with high reflection action for long-wave heat radiation.

In winter, Low-E film can prevent the heat reflective for inner-house air condition and warmer apparatus from reflect back into house, not like through common glass overflow from construction. In summer, film layer can block sun heat reflection into house, so reduce houses cooled air going out