Incoloy 800/800H/800HT wire mesh

Incoloy 800/800H/800HT Chemical Composition(%): Ni Fe Cr Cu Ti Al C Mn S Si Alloy 800 30.0-35.0 39.5 19.0 -23.0 0.75max 0.15-0.60 0.15 -0.60 0.1 max 1.5max 0.015max 1.0 max Alloy 800H 30.0-35.0 39.5 19.0-23.0 0.75max 0.15-0.60 0.15 -0.60 0.05 -0.1 1.5max 0.015max 1.0 max Alloy 800HT 30.0-35.0 39.5 19.0-23.0 0.75max 0.25-0.60 0.85 -1.20 0.06 -0.10 1.5max 0.015max 1.0 max

Physical and Mechanical Properties: Melting point (ºC) 1357-1385 Tensile strength ( M/Pa ) 450-500

Characteristics: 1. Excellent oxidation resistance, good resistance to carburization and resistance to sulphidation at low concentrations of oxidizing and reducing sulphur 2. Reasonable resistance to nitridation in cracked ammonia 3. Free from both chloride stress corrosion cracking and intergranular corrosion caused by sensitization 4. Excellent resistance to both oxidizing and non-oxidizing salts

Applications: 1. Ethylene furnace quench boilers 2. Hydrocarbon cracking 3. Valves, fittings and other components exposed to corrosive attack from 1100-1800° F 4. Industrial furnaces 5. Heat-treating equipment 6. Chemical and petrochemical processing 7. Super-heater and re-heaters in power plants 8. Pressure vessels 9. Heat exchangers

Specification: Wire ASTM B649 Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch Wire Mesh GB/T 5330.1 GB/T 17492 JB/T 9155 0.5-250 mesh/Inch Thickness: Min0.05mm Sheet ASTM B649 Thickness: 0.05mm and above