Hydrolyzed Polymaleic Anhydride (HPMA)

Hydrolyzed Polymaleic Anhydride (HPMA)

CAS No. 26099-09-2

Properties

HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330℃. HPMA has obvious threshold effect under high temperature (350℃) and high pH（8.3）level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300℃ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.

Specification

items index

Appearance Pale yellow to umber transparent liquid

Solid content % 48.0 min

Bromine value mg/g 80.0 max

Average molecular weight 450 min

pH(1% solution) 2.0-3.0

Density (20℃)g/cm3 1.18 min

Usage

HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.

Package and Storage

200L plastic drum,IBC(1000L),customers’ requirement. storage for one year in shady room and dry place.

Safety Protection

Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Synonyms

HPMA; Hydrolyzed Polymaleic Anhydride; poly(maleicacid);MALEIC ACID POLYMER;maleic acid homopolymer

Dear Sir/Madam

Hi, how you doing?

We are YBC, one of China’s largest manufacturers of organic water treatment chemicals.

Our products are for extensive use in industrial water cycle treatment.

We offer the following chemicals

Corrosion control and chelating agents: ATMP; HEDP; DTMP; PBTC; HMDTMPA; HPAA; BHMTPMPA; etc.; also sodium or potassium salts.

Polymers(anti scaling/dispersant): HPMA; PAA; PAAS; PCA; AA-AMPS; YB-1000, 1010, 1100, 2000, 3100, 5000 (Equivalent Acumer); PESA; PASP; etc.

Bactericide: Benzalkonium Chloride; Isothiazolinones; etc.

RO: YB-0100 (Kinglee PTP-0100 equivalent); YB-191 (Nalco PC-191); etc.

If you are interested in our products pls tell me, and free samples of our chemical agents will be supplied if you need.

Thank you for your consideration.

Best regards

Maggie