High-speed Down Dobby Rapier Loom

The loom is suitable chiefly to weave natural fiber (cotton, wool, flax), chemical fiber and blended fiber, particularly suitable for weaving heavy fabric. It is capable of weaving small jacquard fabrics; The machine can accommodate a harness frame of 20 shafts. Rapier Loom Model GA738-II SpecificationNominal reed width: 2000-2200mmSpeed: Max.

Operating speed 320 pick/min, max. Insertion rate 600m/minWeft yarn count range: Cotton-5Ne-80NeWool-8Nm-130NmMan-made fibers-1200dtex-75texFabric weight: From 70 to 600g/sq. M. Power: Main motor 3kw-6poleShedding: Lower positive mechanical dobby max.

20 shafts, pitch 12 or mechanical jacquardBeat-up: Four-bar linkage with short connecting rodLet-off: Mechanical positive and continuous warp let off, pick density from 4 to 73 picks/cmTake-up: Mechanical positive and continuous warp cloth take-up. Pick density from 4-73 picks/cm. The max. Winding dia.

Full rolling diameter is 500mmWarp stop: Electrical warp stop device with 6 barsWeft stop: Piezo-electronic weft monitor with high sensitivityWeft selection: Electronic weft selection which is available in single or mixed or multicolor up to 6 colorsWeft feed: The loom is possible to be equipped with different types of weft accumulatorsSelvedges: Leno selvedges are driven by the 1st and 2nd of heald frameElectrical control: The most advance electrical control system, microprocessor units guarantees all the machine functions, supervising operation, collecting and storage and display of productivity dataLubrication: The whole needful lubricating point is concentrative lubricated by means of a manual pump