Handy Calibrator

Multi-functional and high-precision calibrator that can be used to calibrate and test industrial process devices and various electronics equipment.

Multi-functional Hand-held Calibrator: -Highly accurate within 0.02% of the DC voltage range for source and measure -Source and measurement can be performed simultaneously. -Vertical body with large-screen display -Loop power supply function (24 VDC at a load of max 22 mA) It is possible to measure current in the mA range while supplying power. -Sink function -Sweep functions that allow 3 types of continuous outputs: Step sweep function Linear sweep function Program sweep function Features: - Vertical hand-held calibrator: Easy-to-hold vertical type is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys.Using the main unit body case (model name: 93027) , you can hang CA150 to your body or a handrail to keep it handy. - Simultaneous signal source and measurement operations at the same time: In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multi-meter were required.

Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters. - Highly accurate and multi-functional source and measurement: High accuracy: 0.02% for the generation unit and 0.02% for the measurement unit for DCV Range Source and measure function of DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse Source unit response time is minimum 5msec only DC1V,10V,500ohm(excitation current 1mA) and RTD(excitation current 1mA) of range. - Loop power supply function: It is possible to measure generated current signals while supplying loop power from a two-wire type transmitter (up to 22 mADC).

GENERAL SPECIFICATIONS: - Specifications common to source and measurement: •Communication functions Serial interface RS232 D-Sub 9-pin connector •Memory functions - Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement). - Common source specifications: •Power supply 6 AA size alkaline batteries AC adapter (sold separately) or dedicated NiMH battery (sold separately) AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A OUTPUT: 12 VDC, 3 A •Battery life Conditions: Simultaneous Source/measurement Output of 5 V DC/10 k
or more Size AA alkaline batteries When 6 batteries are used: Approx.

8 hours When NiMH battery is used: Approx. 10 hours •Auto power-off Approx.

10 minutes; it can be canceled by setting. •Insulation resistance Between input terminal and output terminal: 500 VDC, 50 M
or more •Withstand voltage Between measurement terminal and generation terminal: 350 VAC, 1 minute •Operating temperature/humidity range: 0 to 40°C, 20 to 80%RH (no condensation) •Storage temperature range: -20 to 60°C 90%RH or less (no condensation) •External dimensions:Approx.

251 x 124 x 70 mm •Weight: Approx. 1000 g (with Batteries) •Accessories Lead cable for generation: 1 set Lead cable for measurement: 1 set Carrying case: 1 Terminal adapter: 1 Size AA battery: 6 Instruction Manual: 1 Fuse for measurement: 1 (spare) •Conforming Standards Safety EN61010-1 EMC