Hand Plastic Extruder (RYH5001)

1. Widely used in plastic welding, plastic container welding, plastic pipe, plastic tube, plastic plate, electri-welding equipment etc. 2. Three attentions as following: A. Thermoplastic plastic HDPE. PP. PVDF and PE can show the characteristic best. B.

It is forbidden to use for electric condition plastic (PE-EL), which can bring electric conduction short curcuit of machine. C. It can once weld the line with width of more than 10mm and plastic board with 40mm below D. It use METABO drive unit and LEISTER hot air blower

Welding materials: PP, PE Welding performance: 2Kg/h with 4 mm wdlding wire-Φ Welding wire: Circular, 4 mmΦ Wire feed: Feed roller Application area: Container construction, wall thicknesses of 4-20 mm Weight: 5 Kg Drive: 1100 W, 230 V Extruder heater: Hot air Air heater: 3400 W, 230 V Air supply: Internal air supply Autoair Features: Preheating integrated in welding shoe Welding shoe can be rotated about 360°

Temperature table Material Switch position Mass temperature Air temperature PP/PE Level 3.5 approx. 210º C approx. 240º C Level 4 approx. 220º C approx. 250º C Level 4.5 approx. 230º C approx. 280º C