HF rfid module(JMY602H),ISO15693,ISO14443A/B

JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it supports SAM card(38400bps)which was used in domestic card management system.JMY602 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.

Qualifications Model number:JMY602A,JMY602C,JMY602G,JMY602H

PCD: NXP RC500, RC531, RC632, RC400

Working frequency: 13.56MHz

RF standard: ISO14443A, ISO14443B, ISO15693

Operating distance: 100mm (Mifare One, typical distance)

Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only

Auto detecting card: Supported, default OFF

SAM card slot: 1 slot, 9600bps/38400bps

EEPROM: 512 Bytes

PPSS: supported

Interface: IIC, UART, RS232C or USB (embedded CP2102 USB to RS232 converter)

Baud rate: IIC: 400Kbps, UART/RS232/USB to RS232: 19200--115200 bps

Max.command length: 254 Bytes /511 Bytes

Power supply: DC5V

Power consumption: 80mA

Dimension: 100mm×70mm×10.2mm

Weight: about 120g

Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

ISP: supported

RoHS: Compliant

Model Number

JMY602A ;NXP RC500; ISO14443A

JMY602C;NXP RC531; ISO14443A.ISO14443B

JMY602G ;NXP RC400; ISO15693

JMY602H;NXP RC632; ISO14443a,ISO14443B,ISO15693