HF rfid module(JMY505G),ISO15693

JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.

Qualifications Model Number:JMY505A,JMY505C,JMY505G,JMY505H

PCD: MF RC500, RC531, RC632, RC400

Working frequency: 13.56MHz

Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order

RF standard: ISO14443A, ISO14443B, ISO15693

Operating distance: 100mm(depending on card and antenna design)

Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only

EEPROM: 512 Bytes

Interface: IIC & UART (selected by SPS pin, recommend to use IIC)

Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps

Max.command length: 511 Bytes

Interface level: 3.3V(TTL level; 5V tolerance)

Power supply: DC 5.0V

Power consumption: 70mA

Dimension: 42mm×21mm×8mm

Package: DIP32

Weight: about 15g

Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

ISP: Supported

RoHS: Compliant

Model Number

JMY505A;NXP RC500; ISO14443A

JMY505C;NXP RC531; ISO14443A.ISO14443B

JMY505G;NXP RC400; ISO15693

JMY505H;NXP RC632; ISO14443a,ISO14443B,ISO15693

Antenna connects to the module by 4 wires.

TX500, size: 70mm*70mm, 90mm reading range

TX501, size: 50mm*50mm, 70mm reading range

TX502, size: 30mm*30mm, 60mm reading range

Any requirements is available.