HF RFID module(JMY612C), ISO14443A/B

JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through RS232C interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.

Qualifications Model Number:JMY612C,JMY612H

PCD: NXP RC531, RC632

Working frequency: 13.56MHz

RF standard: ISO14443A, ISO14443B, ISO15693

Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only

Auto detecting card: Supported, default ON

SAM card slot: 4 slots, 9600bps--115200bps

EEPROM: 512 Bytes

Interface: RS232C

Communication rate: 19200--115200bps

Max.command length: 1024 Bytes

Interface level: 3.3V(TTL level; 5V tolerance)

Power supply: DC 5.0V

Power consumption: 150mA

Dimension: 87mm×65mm×10mm

Weight: about 50g

Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

ISP: Supported

RoHS: Compliant

Model number

JMY612C;NXP RC531;ISO14443A,ISO14443B

JMY612H:NXP RC632;ISO14443A.ISO14443B,ISO15693