Graphic Equalizer Professional Audio

Switchable boost/cut ranges of 6 or 15dB

Electronically balanced/unbalanced inputs

Servo balanced/unbalanced outputs

RF filtered inputs and outputs

XLR, Barrier Strip, and 1/4" TRS connectors

-12dB/+12dB input gain range

18dB/octave 40Hz Bessel low-cut filter

Chassis/signal ground lift capability

Internal power supply transformer

Power-off hardwire relay bypass with 2-second

power-up delay

INPUT

Connectors1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

TypeElectronically balanced/unbalanced, RF filtered

ImpedanceBalanced 40k ohm, unbalanced 20k ohm

Max Input Level>+21dBu balanced or unbalanced

CMRR>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type: Impedance-balanaced/unbalanced, RF filtered

Impedance Balanced 200 ohm, unbalanced 100 ohm

Max Output Level >+21dBu balanced/unbalanced into 2k ohm or greater >+18dBm balanced/unbalanced (into 600 ohm)

SYSTEM PERFORMANCE

Bandwidth20Hz to 20kHz, +0.5/-1dB

Frequency Response<10Hz to >50kHz, +0.5/-3dB 15dB range 6dB range

Dynamic Range109dB 115dB

Signal-to-Noise 90dB, 97dB

THD+Noise<0.005%

Interchannel Crosstalk<-80dB, 20Hz to 20kHz

FUNCTION SWITCHES

EQ BypassBypasses the graphic equalizer section in the signal path

Low CutActivates the 40Hz 18dB/octave high-pass filter

Range Selects either 6dB or 15dB slider boost/cut range

Dimensions5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm)
Contact now for more information or questions!