Name: Gates PowerGrip Twin Power Timing Belts
SKU: b-9

Gates PowerGrip Twin Power Timing Belts

Twin Power belts have teeth on both sides to provide synchronization from both driving surfaces.

Markets/Applications

PowerGrip Twin Power Timing belts are suitable for all industrial serpentine applications requiring rotation reversal in some driven shafts.

Features/Advantages

Gates Twin Power belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of belt.

Belt capacity is equal to standard single-sided PowerGrip Timing belts.

Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.

Neoprene body provides protection against grime, grease, oil, and moisture.

Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.

Recommended Pulleys-PowerGrip Timing Pulleys

Notes

Gates PowerGrip Twin Power Timing belt part numbers are comprised of pitch length, pitch and width. TP denotes Twin Power.

Length-The length is shown in the first part of the belt designation. The first number is the pitch length in tenths of an inch. A TP300L075 has a 30.0' pitch length.

Pitch-The pitch of a PowerGrip Twin Power Timing belt is the distance from center to center of the teeth (in inches). It is shown in the second part of the belt designation by a letter or letters. Part number TP300L075 has a .375' pitch. The letters correspond to pitches as follows

XL = Extra Light = 0.200' pitch

L = Light = 0.375' pitch

H = Heavy = 0.500' pitch.

Width-The width is shown in the last part of the belt designation. Part number TP300L075 is .75' wide.

other could provide

Long-Length Poly Chain GT Carbon Belting

Poly Chain GT Carbon Belts

Poly Chain Carbon Volt

Poly Chain HTD Belts

PowerGrip GT3 Belts

PowerGrip GT2 Twin Power Belts

PowerGrip HTD Belts