GDK03 electric control box

The GDK03 electrically controlled box has the monitoring and the completely automatic two kinds, it is suitable in the 40MPa double thread terminal type drying oil centralism lubrication system, uses in controlling the lubrication pump, the cross valve, to make up the fat pump and so on between to be mutually coordinated the work, can realize automatically to system's feed spot feed, after feed completes, automatic stopping.

When the fuel tank the fluid position is lower than certain limit, makes up the fat pump automatic start, after overbrimming the oil, automatic stopping. This control box can send out the feed time expand, to store the oil tube to be spatial, the overloading operations and so on fault signals.

Has continues, manual and automatic many kinds of control work condition, may cut through the box surface on change-over switch.

Continuous duty: After lubricating the pump starts, to the system two main pipelines for delivers the lubricant continually; Manual active status: After main engine interlocking signal connection, the manual start lubrication pump revolution for delivers the lubricant to the system, the automatic reverse forced reversing completes a lubrication cycle after the fat the automatic stopping automatic mode works as after the main engine interlocking signal connection, lubricates the pump fixed time for to deliver the lubricant according to the system hypothesis time-gap to the system, after completing a lubrication cycle, automatic stopping.

Lubricates the pump, no matter in what condition, once stores the oil tube to be spatial, will make up the fat pump automatic start to make up the fat, after compensating, automatic stopping.