GBD-S Tear Tester

Function and usage Mainly test the tear property of paper , mainly using for tearing strength of not more than 1000mN quantitative paper, plastic and foil.

Test principle Lift the pendulum up to certain height, enable it to have a certain potential energy, pendulum tears the specimen while swinging down, computer calculates the decreasing energy caused by tearing.

Unit construction principle Tearing tester elmendorf method is made up with pendulum bracket, pendulum, shaft, stationary clamp, movable clamp, augmenting weights, knife, pendulum releasing system, and computer.

Specifications Test range:0-1000Mn Measuring range :0-6400gf Tearing arm: 104 ± 1mm Tearing the initial angle: 27.5 ˚ ± 0.5 ˚ Indication error: In the power of the ruler maximum range of 20% -90% range, showing the value of the error should not exceed the maximum range of ± 0.5% Relatively change value: less than 1% Sample clamp: by manual Swing arm release: by air pressure Software: RS232, computer adjust assist system Power: 220V/50HZ Configuration 

Cut sample table: no Standard: Mainframe, 200gf basic pendulum, 1600gf augmenting weight400gf,200gf check weight, communication cable, software

Optional: Augmenting weight: 800gf, 3200gf, 6400gf Check weight: 400gf, 800gf, 1600gf, 3200gf,6400gf, User-owner Computer, gas source0.2-0.4MPa Conforms to International standards. ISO 6383、ISO 1974、GB 11999、GB/T 455.1、GB/T 455.2、ASTM D1922、ASTM D1424、ASTM D689、TAPPI T414