Fusion Splicer Pt-600 - Pt-600

Features
• 2.5 inch LCD color display
• Small volume, light weight
• Suitable for science research
• Multiple language options
• User programmable
• 8 Sec. Splice time
• 40 Sec. Tube-heat time
• Auto check fiber end face
• Auto calibrate parameters
Specification
Model Pt-600
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 12~16mm（Coating diameter：250μm）
16mm（Coating diameter: 250 ~ 1000μm）
Fiber diameter Cladding diameter：80 ~150μm
Coating diameter：100~ 1000μm
Fiber Count Single
Image processing method Digital
Actual average splice loss 0.1dB （SM）, 0.08dB (MM),
0.07dB (DS), 0.07dB( NZDS)
Splicing time Typical 8 sec，with standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ＞60dB
Storage of splice result 4000 results，20 parameter per result
Tube heating time Typical 30 sec
Tube heating mode 8(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen 2.5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions 130mm(L) x135mm (W) x135mm (H)
Weight 2.0 Kg excluding battery,2.5 Kg including battery