Foil backed Pavement/Road Marking Tape

PLYON PL2000 foil backed pavement marking tapes are designed to stripe asphalt and concrete surfaces, parking garages, warehouse floors, factory floors, roads and any other area where high visibility delineation is needed. Our tape is simple to install with no special equipment or contractor required.

It is as thick as normal parking lot paint and has a durable, reflective surface. The tape's aggressive adhesive and conformable foil backing insure that when properly applied your reflective white, yellow lines will remain in place. Durability depends on traffic flow and proper installation.

The tape performs best on smooth surfaces where all of the tape can make contact with the surface. Parking lots or warehouses with moderate to light traffic often get years of service out of the tape. The tape will conform to a moderately rough surface but performs best on smooth surfaces.

Features :High visibility; easy application ; conformable to the substrate Application: It is designed for temporary installations, such as traffic lane lines, road construction sites, detours and similar traffic control requirements Reflectance Table # 1 illustrates PLYON PL2000 pavement marking tapes excellent minimum reflective properties.

Measurements made using ASTM Test Method D4061. Table # 1 Minimum Retroreflectivity Values

White

Yellow

Entrance Angle

88.76&deg

88.76&deg

Observation Angle

1.05&deg

1.05&deg

Retroreflectivity(mcd/m2/lx)

300

200

Skid Resistance

The surface of PL2000 provides excellent skid resistance. When tested according to the procedures specified in ASTM-E-303 it exhibits an initial minimum skid resistance value of 45 BPN. Performance Life It is recommended that each customer thoroughly evaluate PLYON Pavement Marking Tapes under the conditions in the specified location.

PLYON Technologies makes no generalized performance claims. Standard Dimension : ● Standard length : 33m , 50m ● Standard width : 10cm, 15cm, 20cm, 40cm, 45cm; Or according to customer’s requirement. Application Methods: Surface preparation is important for proper performance.

The surface must be clean and thoroughly dry, with an ambient and surface temperature of 35 degrees F or above. Never apply tape over loose or caked dirt, gravel, oily residues, flaking paint or other foreign substances that will interfere with proper bonding. Shelf life: 12 months in the first package under the condition of 23℃×65%RH.

Important notice:The information, data and other statements are based on our testing results, the user should determine the suitability of the product for its intended use.