Flocon135 Reverse Osmosis Inhibitor

Flocon135 is a kind of general scale inhibitor used in the counter-seepage system, and it is especially effective in controling inorganic salt filthy deposition of membrane surface. Flocon135 is the phosphine carboxylic acid peroxide main counter-seepage membrane is accommodating to it.

Flocon135 controls CaCO3, CaSO4, BaSO4, SrSO4 and the CaF2 filthy deposition. Flocon135 may tolerate in the strong brine and it reaches as high as the 0.5ml/l total iron. Flocon135 has passed through the ANSI/NSF standard 60 authentication, and it may be applied in the production tap water counter-seepage system.

Following is the Flocon135 typical nature, but we should not think that is the product goods supply target. The product target prepares is on request.

Appearance: buff liquid Smell: light PH: 3.5-4.5 Solid powder: 33-37%(w/w) Proportions under 20 degrees 1.17-1.20 Boiling spread: 100-103 degrees Solidification point scope: 0-3 degrees Chemical reactivity: Under usual service condition of chlorine or other oxidation disinfectant, it does not influence Flocon135.

Flocon 135 may be used in the membrane system, which uses the chlorine, and the leaning sulfurous acid hydrogen accepts. The Flocon135’s hydrolysis is stable. It does not form the sodium salt, which the sylvite does not dissolve. Using and dosage: Flocon135 is a kind of organic acid solution, concentrated in the condition, which is corrosive.

Therefore, we should use anti-corrosion dosing device. Suitable materials can be 316L stainless steel, or is plastic, for an example: GRP, PVC and PE. Recommended dosing point is in any filtering equipment and supplies filter downstream water. Floco135 could be combined with water in any scale immiscible.

It can be pure in the form of product or the application form solution. The minimum recommended for dosing solution concentration is 10 %( w/w). Flocon135should be joined continuously and is proportional to flow of water, to keep the level of recommended dose.

The dosing doses that needed is related to the quality of the water and salt concentration in the composition of scaling saturation index. We can use the special software to count the scaling index and best returns-ratio. How to add the medicament quantity to forecast and the recommendation is on request.

Our company acts the British blue industrial chemical&US great lake water finishing agent each serial products: Scale inhibitor: Flocon260,Flocon135 ,Flocon150,FloconPlus,Flocon220,Flocon295,Flocon285,Flocon190 Cleansing agent: Floclean MC3, Floclean MC11,Floclean MC10,Floclean MC15,Floclean MC20,Floclean MC25,Floclean MC30,Floclean MC50 Disinfectant: Flocide380