Flocide380 Reverse Osmosis Disinfectant British Blue

British blue industrial chemicals (US great lake disinfectant) Flocide380 Flocide380 is an efficient used in reverse osmosis system of disinfectant. Flocide380 in the sterilization system interval can also press the pre-designed intervals were added to the water in the sterilization to control the growth of biological films.

Reverse osmosis membrane easily got pollution from water-based microbial, which will eventually lead to the membrane surface and reduce the membrane fouling. Microbial film does not reversibly damage membrane, because it causes the degradation of polymer film.

Adhering to the membrane surface of microorganism and other forms of sediment point will also become dirty. In order to ensure the highest efficiency membrane, regularly cleared biofilm is necessary.

Flocide380 is a kind of effective microbicides, it is very applicable to quickly sterilizing in reverse osmosis system, and it has the following characteristics: Fast; Low concentrations, effective Broad-spectrum sterilization, Compatible with reverse osmosis membrane, In the use of concentrations noncorrosive, In the natural environment degradation, easily affect by heat, light, pH.

Product properties: The following is the typical nature, but Flocide380 should not be considered product supply index. Products are on request.

Appearance: colorless amber liquid proportion when in 25 degree 1.04-1.08 Floc point (Aperture cup ) : > 200 degrees About 40 percent of the water solubility (product) Application: should appropriately clean membrane surface or from other parts of the system of organic fouling organisms. water flushing system. 3.

Use appropriate cleaning agent to remove inorganic scale or mineral deposits before sterilization. 4. Dissolve 10 ml Flocide380; prepare 400mg/l Flocide solution in 25 liters. 5. Dilute the pipe and cycle for 30 minutes with good Flocide380 solution. 6. Flush the system with the water to remove the rest of the Flocide 380, discharge wastewater to drain. 7.

Don’t repeatly use antiseptic solution. The formation of intermittent cast controlled biofilm: In two complete systems between Flocide380, sterilization procedures can be controlled intermittently through new growth. Flocide380 should be 360ml/m, continue to be added for 30 minutes Dosage bucket is directly from the water pump.

For example: Water flow 20m/hr = 10m / 30min = 3600ml Flocide380 In the process of 15 minutes that join Flocide380 and after joining it, water of system should be to drain. Once or twice a week’s joining Flocide380 will effectively control the growth of biofilms.

Our company acts the British blue industrial chemical &US big lake water finishing agent and a serial product: Scale inhibitor: Flocon260,Flocon135 ,Flocon150,FloconPlus,Flocon220,Flocon295,Flocon285,Flocon190 Cleansing agent: Floclean MC3, Floclean MC11,Floclean MC10,Floclean MC15,Floclean MC20,Floclean MC25,Floclean MC30,Floclean MC50 Disinfectant: Flocide380