Fiberglass Gypsum Board

Fiberglass gypsum board is a kind of new building materials, which is based on the high-strength gypsum powder as the main raw materials, coupled with glass fiber and special material. It is widely applied to ceiling wall and the veneer wall at present.

Calcite gypsum is a kind of porous material with good sound insulating and heat insulating performance. In the case of moist indoor air, it can absorb moisture content in the air. When it is dry, it can release moisture content to adjust the temperature and humidify the air creating a comfortable environment. You will have the feeling of returning back to the nature.

The thermal conductivity of calcite gypsum is 0.099w/is a special-grade fireproof material. In fire, the gypsum can have end thermal reaction and release moisture content to stop the fire overspreading, and it wont bring up any nocuous, corrosive or suffocative vapor, nor will it volatilized any comb rent or fume.

However, gypsum has a fatal disadvantage: it is loose and fragile, and is deformable when exposed to water. The CCES non-paper-surface moisture-proof gypsum board made by breaks through this bottleneck. Its breaking and load average value reaches u to 512N, exceeding the national standard. It specially made product and reach the strength of 425#cement.

When exposed to water its deflection is 2.0mm (GB5mm) and physical dimension deviation is 1.0mm.Other technically indexed all exceed national standards, allowing it to be at the advanced international level.

By practice, we adopt the mode of wolfram bonding between keel and boards when installing CCES. Consequently, the problem of cracking as existing in other boards in overcome is solved and the decorative effect is kept long. When this product is cut or maintained, after repairing, there wont be any gaps or any traces of repair.