Digital constant temperature magnetic heating blender

Digital constanttemperature magnetic heating blenderuses the high quality DC motor,smallnoise , speedsmoothly ,the fully closed heating plate can be used to auxiliary heating.It can set temperature, long-term heatinguse ,direct and accurate. Stir bar is made of polyvinyl fluoride and high quality magneticsteel,thermostability,wear-resistant, chemical resistant, strong magnetic. Can do mixed work in a closed container,use very ideal and convenient.

Technical Parameter:

Power Supply:220V 50HZ

Heating power:300W
Agitator speed:100—2000R/MIN electrodeless adjustable

Mixing capacity:1000ML
Working dimensions:120MM
Overall dimension:220*130*120MM
Heating temperature : room temperature—99 Celsius degree

Usage:
When use it, check all accessories are complete, then according to the order pack good fixture,put the needing stirring solution to the middle of the Chrome plate.

Add the solution, put the stir into the solution in the beaker, switch on the power, turn on the power switch, indicator light on.

Rotating motor speed switch, transfer gradually from the low speed to high speed,It is forbidden starting with high speed,in case the stir bar isn’t synchronous, cause beat.
Don’t heat when not stir, press “SET” key,then select the temperature. Then Long Press SET key,gauge outfit display “P” , can adjust heating coefficient. Press SET key, display “T”, and can adjust heating time.
Because this instrument is external heating, So when work requirements need constant, must after two blunt temperature, in order to achieve the requirements of constant temperature.

Any problem during use, pls call us ,we will supply good service ,thanks for using.

Announcement
Cut off power supply when not work. Keep instrument clean and dry, prohibited the solution enter into machines.

When stirring, if the stir bar doesn’t beat or stir, check if the beaker stable, position is the center.

Medium speed operation can prolong service life.
When using please connect to the ground,don't work should cut off power supply.

Speed display meter automatic display, no need to operate.