Diesel generator
Listing ID#51847
ModelHT5M65
CategoryGenerators

Diesel generator

Specifications

Origin
Viet Nam
Price Term
EX-Work
Payment Term
T/T
Request Quote
Quick answer

Diesel generator is a Generators product. Key specs — Origin: Viet Nam; Price Term: EX-Work; Payment Term: T/T.

Product Description

SPECIFICATION OF GENSET MODEL HT5M65

HUUTOAN genset model HT5M65, powered by MTU diesel engine model 12V 2000 G25 (Germany) driving a Mecc Alte alternator model ECO 40 – 2L/4 (Italy).

HUUTOAN GENERATOR Generator set + Model HT5M65, Soundproof Canopy (Optional). + Rated output at standby 715.00kVA / 572.00 kW + Rated output at Prime 650.00KVA / 520.00kW + Insulation Class H with tropicalization + Protection IP21 + Power factor cos  = 0.8 + Rated voltage 220/380V + Phase/Frequency 3 phase/50Hz/1500rpm + Coupling Direct coupled.

Dimensions (mm) ( Open) - Length: 4080 - Width: 1600 - Height: 2200 Dry weight ( kg) ( Open) 5760 + Fuel consumption (L) - 69.9 liters ; at 50% load - 101 liters ; at 75% load - 134.4 liters ; at 100% load + Total fuel tank Option + Total lub. Oil capacity (L) 77 liters

The engine and alternator are coupled directly with each other and mounted on a base frame.

Gen-set is designed for intermittent overload capacity of 10 % for one hour in any twelve hours of running at prime rating. Standby power ratings are applicable for supplying electric power in event of normal utility power failure. No overload capacity is available for the standby ratings. ENGINE SPECIFICATIONS

Model engine model 12V 2000 G25 Type In-line cylinder, 4-cycle water-cooled diesel engine Aspiration Turbocharged after cooled Bore x Stroke 130 mm x 150 mm Displacement 23.88 lit Rated speed 1500rpm Starting system Electric starting Cooling system Radiator as standard, oil cooler, Drain Tap Governor type Electronic Starting system Electric starting motor, battery charging dynamic with the voltage regulator, recharged with protection cover the battery.

Exhaust system includes the following items such as flange and counter-flange exhaust silence, stainless steel flexible joint to connect the engine outlet with the exhaust pipe. Engine is protected against low oil pressure, high engine temperature, over-speed.

ALTERNATOR SPECIFICATIONS

Rate output 650 KVA at prime Phase 3 Insulation class H Regulation type AVL Mecc Alternator model ECO 40 – 2L/4 Type Bushless, self excited with AVR, single bearing, direct coupled. Construction Single bearing, self lubricated, self ventilated.

Voltage regulation The voltage accuracy is +/-1% in static condition with any power actor and speed variation between -5% - +30% with reference to the rate speed. Mechanical structure The materials used for the manufacture of the mechanical structure are the following: FeP12 steel for the frame, C45 steel for the shaft and cast iron for the end-brackets.

Overload The permissible overloads are of 300% for 20 seconds, of 50% for 2 minutes and of 10% for 1 hour every 6 hours of operation. Insulation and impregnation Insulation is of class H standard.

Impregnation is made with tropicalized epoxy resin by dipping and dripping, whilst for the high voltage parts by vacuum, so that the insulation level is always very good. Regulation the self-regulation is obtained through an electronic regulator.

The regulator is fed by an auxiliary winding which guarantees an almost constant supply any possible operating condition of the generator. The alternator is equipped with S.R7 regulator, ensuring its performance.

CONTROL PANEL SPECIFICATION Control panel is completed with Auto Start Control panel (Deep Sea 5220)

Indications - AC Voltage - Frequency - Water Temperature - Operating Hour - DC Voltage - Revolutions - Power Factor - Fuel Level (Soundproof type) - Ampere - Oil pressure - Power

Shutdown with indicators - High Water Temperature - Over Voltage - Low Oil Pressure - Under Voltage - Over Frequency - Over Load - Under Frequency - Short Circuit Features - Automatic start - Remote monitoring - Automatic mains (utility) failure - Engine history event log - Automatic load transfer - LED alarm indication - Engine protection - LCD alarm indication - SMS messaging The control panel provides advance metering facilities, displaying the information on the LCD display.

The information can be accessed using the display scroll push buttons located next to the LCD display.

Related Products