Damp-proof Lacquer Putty

Features:1, strong cohesive force, can be well attached to the wall and coating2, good anti-crack function3, good damp-proof function and ventilation can keep the wall and the painting dry4, texture of nature, ensure the decorative paint effects can be completely reflectedSurface Treatment:1, the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.2, new plaster surface should maintenance about twelve days before inserting the lacquer putty, do not use cement paste for calendaring.3, if the wall is too dry, wet the wall before operation till there is no obvious water on the surfaceOperation Process:1, the ratio: damp-proof lacquer putty: water: 25kg/bag + about 6.0-7.0L water2, pouring the water into the stirring barrel, adding the powder slowly, stirring them into particle paste with no powder no deposition3, using inserting tools to batch, after 4-6h of the first insert can make the second time4, polishing the lacquer putty layer, control the thickness between 1.0-1.5mm5, after finishing the lacquer putty layer 7 days can coat other paintings6, nursing the lacquer putty layer by water after it dries 24-48h, keep this for 2-3 days.Tips:a, mixing the MB NO.7 with water into paste, electric mixer can get better effect. put it aside for a few minutes and then a little stirring to strengthen the hardness.b, using appropriate scraper to scrap the lacquer putty on the surfaceTechnical Reference:Coverage area(amount) Technical reference

About 1.8~2.5kg/m2,according to the smooth of the surface 1, status: powder, evenly without caking

2,operation: no scratching barrier

3, dry time: under 4h

4, water resistance(48h): normal

5, alkaline resistance(24h): normal

6, shear strength under standard pressure: >1.2MPa

7, shear strength after water resistance: >0.9MPa

8, shear strength in freeze-thaw: >0.9MPa

Normal Amount:about 1.8~2.5kg/m2, according to the smooth of the surfaceCautions:1, make sure the smooth and vertical rate of the surface before operation2, never mix the dry slurry with water and use again3, the mixed lacquer putty should be used up within 3h4, polishing within 1~2 days according to the weather5, for the base surface by cement paste calendaring, suggesting the MB external repair lacquer putty6, just polish the marks, do not over-polish so as to affects the strengthStore Method:Store in cool and dry place, unopened product can be saved for one year.Packing:2kg/bag, 25kg/bag