Cummins silent diesel generating set 200KW

Cummins silent diesel generating set 200KW

Engine: Cummins Engine

Alternator:Brushless alternator, H class insulation, IP23

Option with: Stamford, Leroy sumor, Meccalte a)three phase brushless generator, self-excited, 4-pole, single bearing b) AVR self-regulated, voltage regulation rate ≤± 1% c) IP23 protection grade d) Class H insulation e) Radio interference restraining accords with stipulation of VDE0875-N and ISO8528 f) Moistureproof, sand-proof, dustproof, salt-proof and vibration-proof

Controller: ComAp brand controller Option with: Deepsea, Smartgen

Generator protection 1.Low oil pressure 2.Over temp 3.Over/low speed 4.Charger failure 5.Over crank Stop failure 6.Low/high charger 7. voltage Emergency 8.Common alarm Generating failure

Standard supply scope Exhaust silencer Flexi pipes AVR Base frame Starting battery Battery wires Battery charger Main circuit breaker Cooling radiator Wire diagram Manual books Auto control panel Optional supply scope

Water preheater PMG ATS External daily fuel tank Silent canopy Lube oil preheater Spare parts Parallel droop Anti-condensation heater ABB breaker Automatic fuel pump Oil drain pump Mobile trailer Weatherproof canopy Synchronization panel

Quality assurance

Factory Inspection, the test items before delivery are mainly as follows:

1. Each genset shall be put into commission more than 4 hours totally. They are tested on idle load, fully load and 10% overload 2. The noise level is tested 3. All of the meters on the control panel shall be tested 4. The appearance of the genset and all of the label and nameplate shall be checked

Warranty Policy Guarantee for one year or 1200 hours whichever reach first from ex-factory date. During the guarantee period, KAPUR will provide the free easy-damageable spare parts of alternator caused by our quality of production or raw material. After expiration, KAPUR provides cost spare parts maintenance of alternator.

Manufacturing standard GB755, Third part of BS 5000,VDE 0530, NEMA MG1-22,IEC34,CSA C22.2-100 and ASB59

FAQ: 1.Q: What is your MOQ of this item? A: 1-10PCS 2.Q: What is the lead time? A: 25-30 days after receiving your L/C or TT deposit. 3.Q: Is it all right to make customer's own brand name? A: We can be your OEM manufacture with your authorization of brand. 4.Q: Where is your Loading Port? A: Fuzhou, China Port. 5.Q: What are your payment terms?

A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. 6.Q: What is your company's available production capacity? A: 3000-5000 pieces against your orders.