Conning oil

Main Composition: Complex substance of low viscous mineral oil, surfactant and special additives.

Technical Index: Appearance: colorless to slight yellowish visous liquid pH(5% aqueous solution): 6.0-8.0 Flash point(open cup): ≥130℃ Density(20℃, g/cm3 ): 0.82-0.88 Dynamic viscosity ( 40℃, mPa .s) 10.0-13.0 (can be adjusted according to customers’s demands) Water content (%) ≤1.3 Emulsifiability(1% aqueous solution) white emulsion Properties and Features: 1.

Low surface tension with excellent penetration and spreading, can be absorbed by filament quickly and evenly, it is easy to control filament oil-pick-up. 2. Low temperature-viscosity correlation. 3. Easy to be emulsified and cleaned up before dyeing to avoid affecting dyeing and finishing. 4.

Excellent property of anti-static, can avoid giving birth to static during unwinding and weaving process. 5. Excellent properties of low oil splashing, preventing oil dropping and oil mist thus to maintain the cleanness of DTY machine and ambience 6.

Has good cohesion, high oil film strength and facilitate good package building thus to prevent filament from falloff, favor the downstream weaving. 7. Eco-friendly, free of APEO. 8.

Transfarchem8 AT 163 . com Application: Suitable for filament oiling of DTY machine with process speed above 700m/min and all kinds of draw and texturing yarn , draw and textured interlaced yarn and colored yarn.

Application Process: Can be used directly, no additives are needed, added to filament by lick roller or nozzle. Perfect oil content is available through adjusting.

Packing & Storage: 170kg in one plastic drum, can be stored for 6 months under room temperature and hermetic condition.

Notes: 1. Do not mix with water and exposed under burning sun. 2. In order to achieve normal effect remember to use diaphragm-pump.