Commercial hot water pool heat pump

ALTO Commercial hot water pool heat pump is a new product for heating your swimming pools.

Alto commercial hot water pool heat pump features:

High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9.

The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.

The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available. Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions.

And it also combines both water heating and water cooling functions together.

Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc

POOL HEAT PUMP SPECIFICATIONS AS-H600Y Design Reverse Cycle Heat and Cool ELECTRICAL INPUT Voltage/phase 380~415Volts /3 /50Hz Amps Per Phase 65.1 Amps Min.

Circuit Size 100Amps PERFORMANCE WINTER(heating) SUMMER(cooling) Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB Entering water temp 27°C 27°C Normal capacity 175.8kW 158.0kW Power input 34.2kW 33.3kW COP 5.14 4.47 Noise level 72d(B)A at 5m 72d(B)A at 5m Approx.shipping weight 825kg Size L*W*H 1120mm*3600mm*2050mm