Coating Thickness Gauge

Using both magnetic and eddy current thickness measurement method, you can measure the magnetic non-magnetic metal substrates can also measure the thickness of coating non-magnetic metal substrates on the non-conductive coating thickness; Has two measurements: continuous measurement (CONTINUE) and the single measurement mode (SINGLE); Has two modes: direct mode (DIRECT), and group means (Appl); There are five statistics: the average (MEAN), maximum (MAX), minimum (MIN), the number of tests (NO.), standard deviation (S.

DEV); Two methods can be used to calibrate the instrument and the basic calibration method can probe the system for error correction; With storage function: can store 500 measurements; With the print function: to print measurement, statistics, gauge, histogram; Operation prompted a beep; With the error function, through the screen display or beep for error; There are two shutdown modes: manual mode and automatic shutdown shutdown mode.

Technical parameters

Probe Type F N Eddy current principle of magnetic induction Measurement range (μm) 0 ~ 1250 0 ~ 1250 of which: copper Chrome (0 ~ 40) Low resolution (μm) 0.1 0.1 Error-point calibration (um) ± (3% H +1) ± (3% H +1.5) Two-point calibration (μm) ± [(1 ~ 3)% H +1] ± [(1 ~ 3)% H +1.5] Test The diameter of the smallest size (mm) Φ7 Φ5 Substrate critical thickness (mm) 0.5 0.3 SD1-TT210 digital coating thickness gauge standard

SD1-TT210 host 1 Standard chip 5 Matrix 2 AAA-type 1.5V (7) dry 2 Instrument Pack 1 Manual 1 Optional TA220S printer 1 set Communications cable 1 Communications Software 1 Ambient Temperature 0 ℃ ~ 40 ℃ Humidity 20% RH ~ 90% RH No strong magnetic field Power supply: two AAA-type 1.5V (7) dry Dimensions and weight: Dimensions 110mm × 50 mm × 23 mm Weight: about 100g