China (Mainland) Network Cable Tester

Specifications: Serial Network Cable Tester Test by cables of the Same BNC Axes: one end of the cable into both main tester and BNC socket,and put the other into the remote tester. 2.Switchin the power,which works if the light is on. light will not be on when the cable is flash of the light means an improper cable is connected.

4.Press the button on the left of the main the light is green,the cable works;if not(means red or any othercolor of light),the cable is out of work. Test by Twin-twisted Cables: one end of the cable into the main tester.

2.Switch on the power,which works if the light flashed. switched on,LEDS of the remote tester will scan the cable the cables are good,the corresponding LEDS will turn green the cables are outof work,the LEDS will first turn green then red or other others,or the LEDS will not be on or be on disorderly. the cables are shielded,shieldingis tested when GND is turned shielding is normal,the corresponding LEDS and GND will turn not ,the LEDS will first become green then ted or will not be on at all.