Charcoal (Malaysia)

Our sawdust briquette charcoal The most environment-friendly fuel you can burn in your cozy home! Production process A unique and exclusive process where specially selected sawdust gathered from environment friendly sawmills are blended and processed into sawdust briquette.

This sawdust briquette is 100% made from sawdust wood waste with no chemical additives or combining agents. Expect to use less fuel than you do currently due its higher radiant heat output as it burns far slower than other fuels. It is extruded to standard lengths of 440mm and an outside dia.

Of 55mm, weighing approximately 1200g each in various profiles with a center hole to aid combustion. These are cut to customers specifications and packed under various brands.

Product characteristics Heat value comparison chart material condition kcal/kg moisture specific gravity flash point 1 fuelwood raw 2,800 40% 0.351 n/a dry 4,300 17% 0.175 n/a 2 our briquette dry 7,500 7% 1.17 300 degrees celcius The burning characteristics give a higher radiant heat output.

Being dense, it does not spark or split when burning and burns down to 0.35% ash(itself a good wood ash). It mixes with other fuel, in particular wood, which it helps burn if unseasoned. It is clean to handle and ideal for open fires, stoves, boilers and solid fuel cookers.

Shipment Packed in standard of 16 logs at approx.9.5kg, double strapped and shrink wrapped to prevent moisture, each 20 foot container can be stuffed with 1840 packs(17.48 tons) depending on road/port limitation regulations of country of destination. Palletising(std.880mm(w) x 1100mm(l) x 90mm(h) ) can be arranged upon request.

Each pack is so designed to keep creepy crawlies out and enhance transportation handling, storage to shelf display. Quick to light, slow to burn, highly heat efficient Tests comparing ecologs with coal and coalite show just how efficient this unique fuel burns. Remembering the radiation output of firewood is less than coal or coalite.

Ecologs lits quickly and rapidly rose to a higher temperature than coal or coalite. Ecologs gave a higher level of radiant heat overall. Ecologs burnt more cleanly with low tar and chimney deposits. Ecologs left virtually no unburnt fuel and a minimum amount of fine ash.

Ecologs burnt most economically, with less fuel required to keep the room warm when re-charging the fire. Ecologs burnt safely without sparks or spitting. Extruded briquettes are processed into charcoal in kilns at high temperatures under controlled conditions to bring out the desired carbon content.

Each charcoal bar 350mm in length is hexagonal in cross-section, centre-holed to aid aeration and combustion. Test in lean oxygen environment in the highlands of kathmandu, nepal and overseas(korea) shows maximum calorific output per kilogram and burns a lot longer than other fuels without sparks, spitting, explosive gases, smoke or odours.

You can expect significant savings on your fuel cost. It is a new renewable fuel, clean, safe and environmentally friendly to use. Ideal for b. B. Q, heating, grilling, stewing, stoves etc. Heat value comparison chart No material kcal/kg moisture specific gravity flash point 1 high tem.

Coke 7,470 1% n/a n/a 2 white charcoal 7,500 5% n/a n/a 3 our briquette charcoal 8,140 4.5% 1.60 520degrees celcius