Cement Foam Insulation Board Production Line

Production Line The production line of cement foam insulation panel is the latest set of equipment developed by the company based on the market demand. The production line divides the process into stirring system, circular pouring system, ejection system, cutting system, packing system, storage system and scrap crushing & recycling system.

The capacity per shift of the production line is 150-200 m³. The automatic control production process is used with required 6-8 workers, Which greatly decrease the production cost.

Stirring System Spiral feeding is used with automatic mixing and measuring. The measuring is more accurate. The cement, fly ash and water can be measured automatically. Other raw materials are added manually. Secondary mixing and measuring are adopted to reduce the dust pollution.

Circular Pouring System Hydraulic propulsion cycle is adopted to make the poured product operating stably in the cycle, with no impact on the foaming effect. Hydraulic propulsion is used as power to reduce the equipment fault rate and damage rate of the finished products.

Cutting system Streamline operation is used on the whole line without needing to handle the briquette. Guide on line of briquette positioning cutting at both side horizontally --- 4 saws cutting vertically --- automatic tilting for 90º --- cutting into finished panel --- finished panel packed with plastic packer.

Cement foam insulation board 1. Introduction: The Specification is 1000 * 600 * 90 mm in general, There are 90mm, 120mm thickness and so on. Also can be customized according to customers requirements on specifications. 2.

Applications: Widely used in all kinds of civil construction, public construction and medium-to high-grade factory for external wall insulation decoration. 3. Materials: Stone powder (fly ash, construction waste, sand,etc), plant fiber, inorganic environmental adhesives, reinforcing materials. 4.

Technology: Mixing ingredients → stirring → forming → mold ejected → cutting → maintenance → testing to leave factory 5. Equipments: Wallboard production line, stirring equipment, cutting machine, forming machine, foaming machine,etc. 6. Selling Point: Fireproof, waterproof, soundproof, insulated. 7.

Machine Feature: High degree of automation, large productivity. 8. Products Feature: Light weight, thermal insulation, fireproof, waterproof, mould proof, termite proof, soundproof, insulated, impact-resistant, acid and alkali-resistant, aging-resistant, anti-freezing, high strength, durable,also can be nailed, sawed and bonded.

Good manufacture performance and easy to install.It’s green and environment-friendly without irritation and toxic gas releasing. 9. 9. Advantages: Matured technologies, simple craft, low invests, low price.

Production Process 1. Control the materials accounts and measurements for composite cement foam insulation board accurately. 2. Feeding part 3. Pulping part, based on the foaming agents and serosity accounted at first step. 4. Pouring in molds after mixing 5. A period of time for conserving and cutting after pouring. 6.

Finally, Moisturizing properly in order to reinforce the strength and waterproof performance.Then the composite cement foam insulation board finished.