CANBus/CANOpen/ControlNet HUB

CAN/CANOpen/ DeviceNet, for Phoenix, PSI-MOS-DNET CAN/FO,CAN bus Fiber-Optic,CAN bus Optical fiber Modem,CANbus to fiber optic repeaters,Fiber optic repeater for CAN bus,Fiber-Optic CAN bus,CANOpen to Optic Fibres repeater,Fiber Optic CANOpen.

PSI-MOS-DNET CAN/FO 660/BM - 2708054 - FO converter can.

Can bus data fiber optic repeater (can transmit 2 channels can bus simultaneously/at the same time.)

Can optical-electrical converter (photoelectric converter, trical transducer, optical-to-elec) (fiber optic self-healing ring network)

Can fiber optic repeater (high grade high speed far distance transmission)

CAN fiber optic, PROFIBUS DP repeater, OLM/G12, singlemode OLM, for Siemens OLM, Siemens optical fibre, DP single-mode optical-electrical converter (photoelectric converter, trical transducer, optical-to-elec).

Can (canOpen, devicenet, canbus) fieldbus dual network fiber optic ring repeater is different with the existed equipment; our devices can solve the problems that the existed ones can’t communication for high speed or long distance. Furthermore, there are 2 groups of fieldbus interface of can (canOpen, devicenet, canbus), which can simultaneously transmit 2 channels of can (canOpen, devicenet, canbus) fieldbus signal, and 2 groups of fiber optic ports can make up the fiber optic ring network, the system will rebuild the network link within 10ms when the link failures somewhere, to guarantee the system communicate normally, achieve the function of self-healing protection of signal transmission, the system will automatically recover after the network failure recovery.

#12304;Specifications&#12305

Electrical Interface

#61656; 3 pcs of 5pin port, conform the CiA organizational recommendation.

#61656; Support CAN BUS/DeviceNet/CANOpen bus standard.

#61656; Communication Rates: DeviceNet/CANOpen all and normal used rate grade for CAN bus, up to 1M.

#61656; Have the protection function of 4000V anti-lightning, 1.5A over-current and 600W surge-proof.

#61656; Terminal Resistance: the equipment without terminal resistance, please use the external one when necessary.

Power and Protection #61656; Power: dual power redundancy input, DC（12-36）V, typical DC24V, power consumption less than 4W, has DC1500V voltage isolation and reverse protection, industrial terminal interface.

#61656; Relay alarm output: optical fiber link failure and power error alarm output, maximum capacity of contacts: DC48V/1A, industrial terminal interface.

Mechanical Properties #61656; Dimensions: 132mm×105mm×52mm

#61656; Casing: IP30 protection grade, wave pattern aluminum enhanced casing.

#61656; Installation: 35mmDIN rail installation.

#61656; Net weight: 800g

Environmental #61656; Operating Temperature: -10-70℃ (-40~+85℃ optional)

#61656; Ambient Relative Humidity: ≤90% (non-condensing)

#61656; Storage Temperature: ﹣40～80&#8451

#12304;Order information&#12305

P/N Series Description Unite

Ci-aa30 3 electrical ports 3 channels independent Can bus interfaces, DIP switch set rate pcs

Ci-dd30 3 electrical ports 3 channels independent DeviceNet interfaces, DIP switch set rate or rate adaptive optional pcs

Ci-oo30 3 electrical ports 3 channels independent Canopen interfaces, DIP switch set rate or rate adaptive optional pcs