Black Welded wire mesh

Low carbon electric-galvanized welded wire mesh 12.7 mm x 12.7 mm x 0.9 mm x 1000 mm x 30 m 25.4 mm x 12.7 mm x 0.9 mm x 1000 mm x 30 m 25.4 mm x 25.4 mm x 1.4 mm x 1000 mm x 30 m 50.8 mm x 25.4 mm x 1.6 mm x 1000 mm x 30 m 50.8 mm x 50.8 mm x 1.8 mm x 1000 mm x 30 m End application: for plastering.

Low carbon (black) welded wire mesh 12.7 mm x 12.7 mm x 0.9 mm x 1000 mm x 30 m 25.4 mm x 12.7 mm x 0.9 mm x 1000 mm x 30 m 25.4 mm x 25.4 mm x 1.4 mm x 1000 mm x 30 m 50.8 mm x 25.4 mm x 1.6 mm x 1000 mm x 30 m 50.8 mm x 50.8 mm x 1.8 mm x 1000 mm x 30 m End application: for plastering.

Low carbon hot-dipped galvanized square welded wire mesh Size of opening: 12.50 mm * 12.50 mm; Wire diameter: 0.50 mm; Width of roll: 1275 mm. Weight of 1 square m.: 0.240 kg. End application: for producing armored glass.

Quality specifications: 1. Allowable wire diameter tolerance: -0.02 mm. 2. Allowable tolerance of size of opening: + 0.50 mm. 3. Allowable tolerance of width of roll: + 10 mm. 4. Low carbon heat-treated wire should be used for making wire mesh. Wire surface must be bright, without chaps, exfoliation, rolling marks and rust.

The welded places must be fixedly welded. 5. The wire mesh should not have detached wires. 6. Weld should have breakout power no more than 49 N (5 kgF). 7. Each roll of wire mesh should have length within 100-200 running meters. Allowed: Single spills in quantity no more than 1% from the total quantity of openings per 1 sq.m. (in non-concentrated area).

No more than one completely detached wire per 50 running meters.