BP solar panel

Typical Electrical Characteristics Rated power (Pmax)3: 185 Watts Voltage at Pmax(Vmp): 36.0 Volts Current at Pmax(Imp): 5.1 Amps Short-circuit current (Isc): 5.7 Amps Open-circuit voltage (Voc): 44.0 Volts Module efficiency: 17.0% Tolerance: -3/+5% Nominal voltage: 24 Volts Temperature coefficient of Isc: (0.065±0.015)%/°C Temperature coefficient of Pmax: -(0.5±0.05)%/°C NOCT: 47±2°C (Air 20°C Sun 0.8kW/m2, wind 1m/s) Maximum Series fuse rating: 15A (T) Application class (according to IEC 61215&IEC61730): Class A Maximum system voltage: 600V (U.S.

NEC rating); 1000V (IEC 61215 rating); 1000V (VDE rating) Mechanical Characteristics Solar Cells: 72 cells (125x125mm) in a 6x12 matrix connected in series Front cover: High-transmission 3.2mm (1/8thin) tempered glass Encapsulant: EVA Back cover: Polyester PET or TPT Frame: Clear Silver anodized aluminum alloy type 6063T6 Universal frame Diodes: IntegraBus™ technology includes Schottky by-pass diodes integrated into the printed circuit board bus Junction box: J-Version junction box with 6-terminal connection block; IP65, PG13.5 M20,1/2 inch conduit,or cable fittings accepting 6-12mm diameter cable Terminals accept 2.5 to 10mm2(8 to 14 AWG) wire Output Cables: RHW-2AWG#12(4mm2) cable with polarized weatherproof DC rated Asymmetrical lengths: -1200mm (+) and 800mm (-) Dimensions: 62.5" x 31.1" x 2.0" (1587 x 790 x 50 mm) Weight: 33.95 lbs.

(15.4 kg) Warranty Free from defects in materials and workmanship for 5 years 93% power output over 12 years 85% power output over 25 years Qualification test parameters Temperature cycling range:-40°C to +85°C(-40°F to 185°F) Damp heat test:85°C, 85% relative humidity Front and rear static load test (e.g.: wind):2,400pa (50psf) Front load test (e.g.:snow):5,400pa (113psf) Hailstone impact test:25mmΦ(1 inch) at 23m/s(52mph)