Anti-wear agent

The product is a high molecular weight polymer which independently developed by our company with special arts and crafts, adding a small amount to the thermoplastic can significantly improve the product’s abrasion resistance and reduce the coefficient of the fraction (COF). At the same time, glossiness are improved as well.

Typical nature:

	NM-1	NM-2	NM-6
appearance	White pellet	White pellet	White pellet
Application	TR\TPR	EVA,PVC	TPU
Recommend dosage	0.8-5%	1.5-8%	0.3-2%
Melt index	≥6 (190℃,2.16KG)	≥2 (190C,2.16KG)	≥2 (190C,2.16KG)
Water content	≤0.5%(70℃,2h)	≤0.5%(70C,2h)	≤0.5%(70C,2h)

Features:

1. Cost-effective, small amount addition, outstanding abrasion resistance properties

The product produced with special arts / crafts and high technology. On the today’s market, 2~3% addition of our products can achieve the same level as the 5~10% addition of traditional agents. Even if the customer has a near-stringent requirements of abrasion resistance, our products can help you to meet their needs. With our products, whether your products are used in running shoes, basketball shoes or the various professional sports shoes, you do not need to worry about the weariness.

2. Environmental protection

This product doesn't contain lead, mercury, chromium and other heavy metals, It is fully in line with EU SGS certification requirements. At the same time, it is has good thermal stabilities, no smoke produced during the processing. Especially suitable for the customers who have requirements of environmental protection.

3. Will not change the product's hardness

The hardness always increased after the traditional abrasion agents added, easily make the folding resistance decreased. While our product doesn’t affect the basic mechanical properties of the original product.

4. No affect on color

5. The abrasion resistance is same for both inside and outside, will not change

6. To improve the processing performance and appearance

Typical formula:

Formosa plastics 7350	60kg	Abrasion resistant agent	3.5kg
TALC	7kg	DCP	800g
AC blowing agent	1400g	ZnO	1200g
Stearic acid	400g	Stearate zinc	400g
Mobile agent	800g

Typical features:

hardness	65
Abrasion scar(international standard)	8.0 mm
DIN	135

Note: The above data just shows the typical application performance of our abrasion agent, not a basis for the legal commitments.

Used methods:

Add the product into thermoplastic resin, mix equally and then extrude it to pellet, or directly mix with resin then injection (the effect not good as the first one).