Alumina lining tile

Material:92% alumina

Bulk density is normally over 3.6g/cm3

Tolerance for length and width:1%

The smallest tolerance for 6mm thickness:0.5mm(need be controlled specially)

Note:The content of Calcium is lower,the wear resistance is better

The thickness is thinner,the tolerance of flatness and thickness is more difficult to control

The content of alumina is higher,the corrosion and the high temperature resistance is better

Packing:tiles are put in carton box,every tile is separated by 3mm cardboard,the box are put on pallet

high wear resistance, acid and alkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material; Wear resistance of ceramic is 266 times than that of special manganese, 171.5 times to high chrome cast iron; Hardness is much higher than that of wear-resistant steel and stainless steel.

Application: Oil, mining, steel and power industry.

Size Available(mm): Length x width x height
25mm x 25mm x 3mm
25mm x 12.5mm x 3mm
50mm x 25mm x 3mm
50 mm x 12.5 mm x 3 mm
25mm x 25mm x 5mm
25mm x 12.5mm x 5mm
50mm x 25mm x 5mm
50mm x 12.5mm x 5mm
25mm X 25mm X 6mm
25mm X 12.5mm X 6mm
50mm X 25mm X 6mm

Trapezoidal Tile: Customized
Hex Mat 150MM x 150MM of 6MM Tile
Hex Mat 150MM x 150MM of 3MM Tile
Hex Tile 1/2" Pieces 6MM
Hex Tile 1/2" Pieces 3MM