Active Split Pressurized Solar Water Heater
Specifications
- Origin
- China
- Price Term
- FOB
Active Split Pressurized Solar Water Heater is a Water Heaters product. Key specs — Origin: China; Price Term: FOB.
Product Description
All systems have been tested under the highest quality standards to ensure the longevity of your solar heating system. If you are unsure of where to start or require guidance with your solar hot water heating system, please contact a solar hot water specialist at 0086-15995048734
Features:
Simple Installation, No Maintenance, Effective operation
Flat Plat &Anti-freeze Controller
Easy Retrofitting to Existing systems
Porcelain Enamel or SUS316 Stainless Steel Storage Tank With Electrical Back Up
No risk of freezing, equal of solar absorb area, Better efficiency than Evacuated Tube solar collector, But more energy loss.
Operation
The controller (18) will switch on the pump when the temperature at the collector sensor TC is higher than the return temperature TR by at least the pre selected (delta T) amount.
The pump circulates a heat transfer liquid around the loop.
Heat from the collector is transferred to the domestic water through the heat exchange coil in the tank.
With the pump running, if delta T is not met, the pump will switch odd.
When a present tank temperature is reached at Tmax, the controller switches off the pump.
The check valve (non-return valve) prevents heat from the tank facing towards the collectors should the tank be warmer (e.g. at night).
Specifications
Tank capacity(L): 150-500
Tube specification(Diameter x Length) (mm): Heat pipe Ø58 x 1800
Tube quantity: 18-90
Tube vacuum degree: 5 x 10-3
Tube absorption >0.88
Tube heat loss <0.08
Tube heat transfer power: 26000Kw/m2
Working pressure(MPa); 0.6
Anti freeze(C): -40
Anti ice drops(Diameter mm): 30
Tube start working temperature(C) <25
Lighting Area (Made by Alum alloy) (m2): 3.4
Anti-wind support frame (stainless steel): 26.5m/s 10 grade
Inner tank specification (Diameter x Length) (mm): 350 x 2234
Thickness of z tank (mm): 1.8
Material of outer tank: steel coated with AL & Zn
Insulation (mm): polyurethane 65mm
Color of caps on the side of the tank: Black
Heat element(fitted in the water tank): 1100W/220V/50Hz
Controller: 30 C --80 C
Dimensions of inlet and outlet of water: G1/2
Closed loop/open loop/single coil/double coils are all available.
Any questions, please do not hesitate to contact me.
