3 lights SMD5050 LED injection module

Parameters of product： Voltage DC 12V, constant current Power 0.66 W Emitting angle 160° Luminous flux 55 LM Dimension 48*12*7 mm LED Qty 3 PCs Emitting color white Protection class IP65 IP type Injection Material of shell PVC/ABS Color of the shell White/Milk Material of the connecting cables UL1007 20# Color of connecting cable Positive: red; negative: white Cascade quantity 20 PCs Back glue EVA Sponge tape Operating temperature -25℃~60℃ Storage temperature -30℃~70℃ Parameters of light source： Type of led SMD 3020 Emitting angle 120° Life span >30000H Emitting color warm white/pure white/cold white VF 2.7-3.3V CCT warm white pure white cold white 2800-3500 k 3500-6500 k 6500-15000 k Luminous flux warm white pure white cold white 18 lm 19 lm 18 lm Remarks of installation and application: （A）.Don`t stick the surface of the light by sharp tools. （B）.Don`t fix this product by sour glass glue or other soured adhesion;don`t operate or store this product in sour environment or the light will be vulcanized and the life span of the product will be reduced. （C）.Drive this product by 12V DC switch power supply, and the power should be suitable for the quantity of the led modules; do not connect this product to the utility directly, or the product will be burnt up. （D）.The total power of the led modules in series should be lower than 80% of the power of the driver, or the power supply will be burnt up probably,select the suitable thickness of the connecting cable in terms of the quantity of modules, and the connecting points should be wrapped by electrical tape. （E）.The maximum cascade quantity of this product is 20 pieces for one strip, and the brightness of the two ends will be different because of the voltage loss when you increase the quantity of the module.