2 or 3 phases seperator

Performance and Application:

lUsed for dewatering, degassing and sand removal from crude oil

lAny water content of inlet crude oil are applicable.

lAny contents of oil and gas are applicable;

lCrude oil density is less than 980 Kgs per cubic meter

lOperating temperature is from -10 to 60°C

lOperating pressure from 0.3 to 8.0Mpa

lProcessing capability is from 10 to 10,000 cubic meters per day

lDimensions of the tanks from OD2.2 m x 10 m to OD 3.2 x 18 m

lAverage water content in purified crude oil is less than 0.5%

lAverage gas content in purified crude oil is less than 0.005g per cubic meters

lOil content in the treated water is less than 50ppm

Advantages

lEmbedded by pulse electric field. More than 90% of crude oil removal clean water once.

lSave the coalescence poling board and packing, Can make the equipment volume reduced by 66.7% and weight reduced by 50%.

lThrough the efficient components can remove the capture of gases. With more than 10μm diameter 99% of droplet, gas fluid containing less 0.03 g meet for requirements.

lUsing the inclined plate and the pressure inside the process that exclude, to improve the efficiency of clay sand (except (size) > 30μm. Except sand ratio (98%), ensure containers not accumulate sand (mud).

lUsing the computer intelligent control, automation system.

lTraditional three-phase separation technology simplified,After the optimization process level, Improve production efficiency.