1E1 over IP converter

Overview 

IDM-TOP800 E1/T1 over IP converter can transmit 1~16 E1 channels over the IP networks. The device supports framed and unframed E1 channel, and support all of the traditional E1 and IP services, such as voice, data, fax, signaling and the other all kinds of communication service. IDM-TOP800 E1/T1 over IP converter is widely used with WLAN to transmit E1 signals.

Features
Transmitting framed and unframed E1 signal through IP network  E1 Number: 1 to 16 channels optional FE Number: 3. (1 of them is electrical, the rest 2 could either be electrical or optical) Low throughput delay Clock Selectable: internal clock, external clock, network adaptable clock or recovered from E1 line Can be configured for N X 64K, or  network adaptable to N X 64K  QoS guarantee for E1 transmitted on the IP network  Easy to configure and use.  Transmitted package based on the IP address, through switches, routers network equipment etc General UTP Ethernet interface, 10M/100M auto-negotiation 

Specifications

Power

Power consumption:≤4W                            

AC power: 160-240v 

DC power: -48V 

Ethernet  

Physical port: RJ-45/FC/SC

Port rate: 10/100Mbps     

Full/half duplex 

Compatible with IEEE802.3 

E1 

Physical port: RJ45 

Input rate range: 2.048Mbps±50ppm 

Port code: HDB3 

Impedance: 120ohm balanced 

Compatible with: G.703 

Environment  

Operating Temperature: 0~50ºC

Operating Relative Humidity: 0~95% 

Store Temperature: -20~65ºC 

Store Relative Humidity: 10~95%  Size  482mm(W)×430mm(H)×152mm(D)  

Application

Ordering information

IDM-TOP801 1E1 over IP/Ethernet 

IDM-TOP802 2E1 over IP/Ethernet 

IDM-TOP804 4E1 over IP/Ethernet 

IDM-TOP808 8E1 over IP/Ethernet  

IDM-TOP816 16E1 over IP/Ethernet