120W PICO-ITX Power Supply

Power Ratings (Max Load = 140 Watts)Output Max Load (A) Peak Load (A) Regulation%

5V 6A 8A 1.5%

3.3V 6A 8A 1.5%

5VSB 1.5A 2A 1.5%

-12V 0.05A 0.2A 1.5%

12V 7A 10A Switched input

At max load, forced air ventilation is required. For fanless operation de-rate the output of the 3.3 and 5V rails by ~20%. Peak load should not exceed 60 seconds. Size: 44.5mm(L) * 20mm(W) * 30mm (H) (1U compliant) Weight: 57gramms, including cable harness, 27 grams without cable harness. DC-Jack: Female, panel mount, 2.5*5.5*10 mm.

ConnectorsMolex 39-01-2200, two 3.5 drive power connector, 1 floppy. P4-12V 4 pin header adapter sold separately. Overload protectionOver load protection will be effected when either of the loads (+5V & +3.3V) exceeds > 200% Max Load.

Turn-on DelayAfter turning on, at least 20 ms will be needed for the rise of +5VSB output voltage (measured from 10% to 95%) to reach its peak. Remote ON/OFF controlLogic level is LOW -Output voltage is enabled (PS_ON pin) Logic level is HIGH -Output voltage is disabled (PS_ON pin) Operating environment: Temperature: -20 to 85 degree centigrade.

Relative Humidity: 10 to 90 percent, non-condensing. Efficiency, MTBF: 95%. MTBF=100K hours at 55Celsius.