0.6/1kv Cu/PVC insulated with armoured power cable - VV22 cable

1.Application:It applies to electrical power transmission and distribution lines with AC rated voltage UO/U up to and including 0.6/1KV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground where excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.
2.Standard:IEC60502, BS7870, GB/T12706
3.Conductor: Class 1/2 annealed bare copper solid or strands
Insulation: PVC
Armore: STA (Remark: for single core the armore should be ATA)
Sheath: PVC
4.Specifications
Product Description
The PVC insulated power cable and fire resistant cable are suitable for fixed laying in power transmission and distribution lines with A. C. 50Hz and voltage rating of up to or including 6KV

Product Description:
1. Conductors: Copper or aluminum.
2. Both armored and non-armored type power cables are available.
3. Voltage rating: 0.6/1kV 3.6/6kV.
4. PVC or PE sheathed.
5. Number of cable cores: One core (Single core), two cores(Double cores), three cores,
Four cores (Four Equal-section-area cores or three equal-section-area cores and one smaller section area neutral core),
Five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
6. Standards: Chinese national standard GB 12706 and GB 12666.6(equivalent to IEC 60502 and IEC 60331)
IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.
Application conditions
1. The long-time permissible operation temperature of conductor shall not be higher than 70oC.
2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160 oC.
3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0 oC.
If so, the cable should to be preheated.
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently
Cu Core
AL Core
Description
Application

VV
VLV
Cu(Al)Core PVC Insulated PVC Sheathed Power Cable
For laying indoors, in ducts and tunnels, but unable to bear pulling force and pressure

VY
VLY
Cu(Al)Core PVC Insulated PE Sheathed Power Cable

VV22
VLV22
Cu(Al)Core PVC Insulated Steel Tape Armored PVC Sheathed Power Cable
For laying indoors, in tunnels and directly in ground, able to bear pulling force and pressure

VV23
VLV23
Cu(Al)Core PVC Insulated Steel Tape Armored PE Sheathed Power Cable

VV32
VLV32
Cu(Al)Core PVC Insulated Fire Steel Wire Armored PVC Sheathed Power Cable
For laying indoors, in wells and underwater, able to bear certain pulling force

VV33
VLV33
Cu(Al)Core PVC Insulated Fire Steel Wire Armored PE Sheathed Power Cable

VV42
VLV42
Cu(Al)Core PVC Insulated Thick Steel Wire Armored PVC Sheathed Power Cable
For laying in wells and underwater, able to bear certain axial pressure

VV43
VLV43
Cu(Al)Core PVC Insulated Thick Steel Wire Armored PE Sheathed Power Cable

NH-VV
NH-VLV
Cu(Al)Core PVC Insulated PVC Sheathed Fire Resistant Cable
For laying indoors, in ducts and tunnels, but unable to bear pulling force and pressure

NH-VY
NH-VLY
Cu(Al)Core PVC Insulated PE Sheathed Fire Resistant Cable

NH-VV22
NH-VLV22
Cu(Al)Core PVC Insulated Steel Tape Armored PVC Sheathed Fire Resistant Cable
For laying indoors, in tunnels and directly in ground, able to bear pulling force and pressure

NH-VV23
NH-VLV23
Cu(Al)Core PVC Insulated Steel Tape Armored PE Sheathed Fire Resistant Cable

NH-VV32
NH-VLV32
Cu(Al)Core PVC Insulated Fire Steel Wire Armored PVC Sheathed Fire Resistant Cable
For laying indoors, in wells and underwater, able to bear certain pulling force

NH-VV33
NH-VLV33
Cu(Al)Core PVC Insulated Fire Steel Wire Armored PE Sheathed Fire Resistant Cable

NH-VV42
NH-VLV42
Cu(Al)Core PVC Insulated Thick Steel Wire Armored PVC Sheathed Fire Resistant Cable
For laying in wells and underwater, able to bear certain axial pressure

NH-VV43
NH-VLV43