Boretec Tools Pty Limited

Boretec is a revolutionary cutting tool used for boring holes. The tool is used as an attachment to any normal hand held drill with a minimum 13mm chuck.

It quickly and efficiently bores holes with a diameter of 25mm,32mm and 38mm through a wide variety of materials. (current production is concentrated on these sizes but we have the ability to produce the tool in any size from 20mm up to 100mm)

The tool eliminates the need for expensive vibrating drilling machines

The tool minimises noise a there is no need to use a large hammer drill which can be a issue on a lot of sites

The tool minimises vibration to the material as it bores though it as apposed to drilling through it. This enables the user to bore holes in materials without them cracking or blowing apart.

The head and the pilot on the tool are replaceable. You can fit the one tool with one of the three different size heads and also only have to purchase a new head or pilot drill once either one wear out.

The heads are coated in either tungsten or diamond. The tungsten head is suitable for most masonry, ceramic tiles terracotta and porcelain. The diamond head is suitable for besser blocks and types of concrete.

Features unique, simple and low cost product

Effective on a wide variety of materials

Easy head removal and replacement

Extremely low vibration

Minimal noise

Safe boring action reduces risk of jamming

For use on

House and besser bricks

Types of concrete

Wall, bathroom and ceramic tiles sandstone and mineral deposits

Terracotta and porcelain

We have been researching and developing the boretec tool for 7 years and commenced wholesale/retail sales at the start of 2005.

We have worldwide patents on the boretec tool.

Please visit our website to see more about the tool