truck mounted rotary table drilling rig - 99

Main features：
1. BZC-400BCA truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary table drilling rig.
2. The truck chassis adopts the 8X4 special crane chassis of brand CHAN'AN TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with BW850/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distributed implement and hydraulic system.
5. We can install the spare electric engine and clutch implement according to client’s requirement, so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
7. There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
8. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
9. According to client’s requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with 850/2A mud pump; can carry out core-drilling with other special drilling tools.
10. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
Technical parameter
Drilling depth（M） 400
Drilling diameter（mm） 500
Speed of turntable（r/min） 117; 102; 60; 38; 22; 13; 14(reverse)
Torque of turntable（KN.m） 7.5------75
Single rope lifting capacity of main windlass(KN) 40
Maximum lifting capacity of main windlass(KN) 240
Single rope lifting capacity of assistant windlass(KN) 40
Single rope lifting capacity of assistant windlass(KN) 160
The lifting capacity of hook（KN） 250
Bearing capacity of drilling tower (KN) 250
The height of drilling tower (mm) 12503
Drill pipe Kelly bar（mm） 108×108×7500
Assistant pipe (mm) .Ф89×10×5700


BW850/2A
plunger pump
Diameter of cylinder (mm) 150
Stroke of piston (mm) 180
Theoreical flow (L / min) 600 850
Rated pressure (Mpa) 3 2
Pounding times (min-1) 58 82
Diameter of suction tube (mm) 127
Diameter of drain pipe (mm) 64
Input speed (r / min) 470
Input power (kw) 40
Overall dimensions (mm) 2000*1030*1400
Weight (t) 1.5

Truck chassis Drive form 8×4

Engine Model YC6A260-33YC water -cooled four strok diesel engine
Rated power（KW） 191
Speed （r/min） 2300
Size （L*W*H）(mm) 11510*2480*2800
Electric generator Model MF
Rated power (kw) 15
Rated voltage(v) 400
Rated current(A) 27
Speed (r/min) 1500
Frequency(Hz) 50
Protection level IP21
Insulation Class H
The highest speed（Km/h） 75
Weight （kg） 20500
Transport size（L*W*H）(mm) 11981x2480x3870
Working size（L*W*H）(mm) 11145x2480x13289
Selectable configuration:



Compressor
Brand Displacement Pressure Diesel engine Power
American Sullar1070XH 30.3 m3/min 2.41Mpa Caterpillar 347Kw
Swedish Atlas XRVSI096 28.3 m3/min 2.0Mpa Caterpillar 328Kw
Japan PDSJI00S 28.3 m3/min 2.11Mpa Mitsubishi 327Kw
Kaishan LGCY26/20K 26 m3/min 2.0Mpa Cummins 298Kw
Hongwuhuan HG900/20 25.5 m3/min 2.0Mpa Cummins 239Kw


DTH Origin Model Diameter Length Weight
South Korea TD50 130-152mm 781mm 62Kg
TD80 194-254mm 1264mm 180Kg
TD100 251-305mm 1575mm 350Kg
TD112 320-381mm 1788mm 618Kg


Drill bit
DTH Diameter
TD50 146mm
TD80 216mm
219mm
250mm
Dust device