Non-ferrous Metal

Selenium (Se) +99.99% Selenium (Se)1, Physical character:Atomic Weight: 78.96Electronegative: 2.48Density: ρ=4.82 g/cm3 Melting Point: mp: 217 °CBoiling Point: bp: 684.9 °C 2, Specification:High Purity Selenium:Se-05 Grade 99.999. The content of Sel

Tellurium (Te) 1, Physical character: Atomic Weight: 127.60 Electronegative: 2.1 Density: ρ =6.24 g/cm? 3 Melting Point: 449.51 Boiling Point: 988 2, Specification: High Purity Tellurium: Te-05 Grade 99.999. The content of Tellurium is above 99.999%

(CNM could provide high quality target material for the field of electrical and semiconductor devices, flat panel display , architectural and automotive glass, thin film solar cell, magnetic storage, instrument, decorate thin film, etc.)High purity metal

1.Features:The silicon metal is Silver gray or dark grey powder, Heat-resistance and good performance.2. Application:The Silicon metal possesses quite widely. For example, to produce organic-Si(Si-oil, Si-rubber) etc in chemical industry. And also regardi

Product Information:Name:Calcium; Calcium Metal; Calcium GranulesCAS No.:7440-70-2H.S. CODE:2805120090Size:0-2mm; 0-3mmPacking: Packing with poly bags filled argon gas in then sealed in steel drum, 175KG Net Drum, 14MTS/20’FCLSpecification: Calcium conten

Sulfur 99.999% Sulfur (S)1, Physical character:Atomic Weight: 32.06Electronegative: 2.44-2.58Melting Point: mp: 386 °CBoiling Point: bp: 444.8 °C2, Specification:High Purity Sulfur:S-05 Grade 99.999. The content of Sulfur is above 99.999%. The total cont

Providing a variety of targets used for CIGS thin-film panel 1, CIGS Target 1.1 Compound: Atomic ratio: 1: 0.7: 0.3: 2 (customized proportion available ) 1.2 Process: Hot process and cold process /sintering. 1.3 Purity: 99.99% above. 1.4: Analysis: ICP-MS

Titanium Forging:CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China.CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381Material ：GR1，GR2, GRContact: info(at

CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China.We supply large volume fastener to chemical industry, distributor, racing moto industry. Grade:GR2,Ti-6AL-4V, GR7Titanium Bolt, Screw, nut and washer can be American , M

CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China.We supply large volume fastener to chemical industry, distributor, racing moto industry. Grade:GR2,Ti-6AL-4V, GR7Titanium Bolt, Screw, nut and washer can be American , M