hydraulic truck mounted water well drilling rig - 98

Main features：

1. BZC600CLCA truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand CHAN'AN TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with WB850/4-80 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distributed implement and hydraulic system.
5. We can install the spare electric engine and clutch implement according to client’s requirement, so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
7. There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
8. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.

9. According to client’s requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with WB850/4-80 mud pump; can carry out core-drilling with other special drilling tools.

10. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.


Technical parameter
Drilling depth（M） 600
Drilling diameter（mm） 500
Speed of turntable（r/min） 117；102；60；38；22；13；16(reverse)
Torque of turntable（KN.m） 5.4----50
Single rope lifting capacity of main windlass(KN) 50
Maximum lifting capacity of main windlass(KN) 300
Single rope lifting capacity of assistant windlass(KN) 60
Single rope lifting capacity of assistant windlass(KN) 240
The lifting capacity of hook（KN） 300
Bearing capacity of drilling tower (KN) 300
The height of drilling tower (mm) 15000
Drill pipe Kelly bar（mm） 108×108×10500
Assistant pipe (mm) .Ф89×10×9000


WB850/4-80
plunger pump
Diameter of cylinder (mm) 106
Stroke of piston (mm) 155
Theoretical flow (L / min) 500 600　 700　　850
Rated pressure (Mpa) 7 6 5 4
Diameter of suction tube (mm) 106
Diameter of drain pipe (mm) 64
Input power (kw) 80

Truck chassis Drive form 8×6

Engine Model YC6A260-33YC water -cooled four strok diesel engine
Rated powe（KW） 191
Speed （r/min） 2300
Size （L*W*H）(mm) 11510*2480*2800
Electric generator Model MF
Rated power (kw) 15 / 30
Rated voltage(v) 380
Rated current(A) 27
Speed (r/min) 1500
Frequency(Hz) 75
The highest speed（Km/h） 75
Weight （kg） 27500
Transport size（L*W*H）(mm) 15543×2480×4032
Working size（L*W*H）(mm) 11139×2480×16749